Icubator for animal

Product Overview

An intensive care incubator for neonates, post-operative and critical patients. Temperature, humidity and CO₂ are displayed on the panel and set with dedicated keys, alongside nebulisation, anion generation, disinfection and chamber lighting.

The chamber is transparent front and top with a roller shutter over the lid, so the patient is observed without opening the chamber and losing the environment that has just been established.

Key Features

• Temperature display switchable between °C and °F
• Combined humidity and CO₂ display with dedicated setting keys
• Nebulisation function for airway humidification and inhaled medication delivery
• Anion generation and a disinfection cycle for the chamber
• Chamber lighting controlled from the panel
• CO₂ alarm with an alarm-clear key on the panel
• Low-water prompts for both the nebuliser and the humidifier — the unit says which reservoir is empty rather than simply alarming
• Transparent chamber with roller shutter lid — the patient is observed without opening the chamber
• Pull-out grille tray with twin removable water drawers beneath
• Operating reference printed on the left of the housing, listing each function and how to set it

Visual Evidence

Technical Specifications

Clinical Applications

• Neonatal canine and feline care, where thermoregulation is not yet established
• Post-operative recovery for patients at risk of hypothermia
• Respiratory cases requiring humidified air or nebulised medication
• Critical care patients needing a controlled environment and continuous observation
• Exotic and small mammal patients, where ambient temperature drives outcome

Workflow Notes

• Fill both reservoirs before admitting a patient — the panel prompts when either runs empty, but a dry humidifier has already let the chamber dry out by then
• Establish the target environment before transferring the patient; the chamber takes time to reach setpoint
• Observe through the transparent front rather than opening the lid. Every opening resets the environment
• Run the disinfection cycle between patients, and confirm the cycle duration against the manufacturer’s instruction
• Do not rely on the panel reading alone for a neonate — confirm patient temperature directly

Package Contents

Downloads & Documentation

Why Choose This Incubator

• Temperature, humidity and CO₂ on one panel — the environment is read at a glance instead of from three separate devices
• Named low-water prompts tell staff which reservoir to fill, which a generic alarm does not
• Transparent chamber and roller shutter mean observation does not cost the environment
• Nebulisation is built in, so a respiratory patient does not have to leave the controlled chamber for treatment

Warranty & Support

FAQ

What temperature range does it hold? The control range and accuracy are pending the supplier specification. Ask us for the current figures before ordering — for neonatal work this is the figure that matters.

Does it control oxygen? The panel displays and alarms on CO₂. Whether oxygen concentration is controlled or only enriched is pending confirmation with the supplier.

Can medication be nebulised into the chamber? Yes. Nebulisation is a panel function with its own reservoir and low-water prompt.

How is it cleaned between patients? The panel carries a disinfection function for the chamber. Confirm the cycle duration and any consumable required against the manufacturer’s instruction.

Do I still need a separate thermometer? Yes. The panel reports chamber conditions, not patient temperature. Confirm patient temperature directly, particularly in neonates.