Name: Basic Digital X-ray DR system iSee-200
SKU: IWA-DR03
Availability: InStock

Basic-configuration veterinary DR system for cost-conscious small-animal clinics — 32 kW generator, 17×17″ CsI flat panel, one-second acquisition.

Product Overview

IWA-DR03 iSee-200 Basic Digital X-ray DR System is the most economical entry into IWA’s veterinary DR line. The system retains the 32 kW high-frequency generator, 17×17″ CsI flat-panel detector, and iVetXray workstation that share components with higher-tier models, while using a smaller 1200×600 mm patient table and a single-display workstation to control cost.

iSee-200 is built for clinics that need consistent diagnostic-quality static radiography on a tight budget — general practice, mobile satellite clinics, and shelter medicine settings.

Key Features

32 kW high-frequency generator: 40–150 kV, 10–400 mA, 1–10000 ms.
Compact dual-focus X-ray tube: 0.5 / 1.0 mm focal spots, 140 kHU anode heat capacity.
17×17″ CsI flat-panel detector: 3072×3072, 139 µm pitch, 16-bit A/D, 3.6 LP/mm.
One-second image acquisition via GigE.
1200×600 mm phenolic-resin table top — sized for small- and medium-animal practice.
LED collimator with 1.0 mm Al inherent filtration at 75 kV.
iVetXray + MiniPACS workstation, single 23.8″ display, Windows 10, DICOM 3.0 PACS support.
Veterinary measurement tools (VHS, TPLO, HIP, TTA) included.

Product Gallery

System views from multiple angles: tube column and table layout, side configurations, and full system setup.

High-voltage generator

Output power	32 kW
kV range	40 – 150 kV
mA range	10 – 400 mA
mAs range	0.1 – 100 mAs
Exposure time	1 – 10000 ms
Power input	Single phase, 110/220 VAC ±10%

X-ray tube

Max voltage	125 kV
Focal spot	0.5 / 1.0 mm (dual)
Anode input power	10 kW (small) / 30 kW (large)
Anode heat capacity	140 kHU

Flat-panel detector

Technology	a-Si TFT, CsI scintillator
Image size	43 × 43 cm (17×17″)
Pixel matrix	3072 × 3072
Pixel pitch	139 µm
A/D conversion	16 bit
Spatial resolution	3.6 LP/mm
Image acquisition	1 s
Data interface	GigE
Min. detectable dose (RQA5)	14 nGy
Sealing	IP65

Table, collimator, workstation

Table size	1200 × 600 mm, phenolic resin top
Collimator	LED, 1.0 mm Al @ 75 kV
Software	iVetXray + MiniPACS
Display	23.8″
OS	Windows 10
Storage	256 GB SSD + 1 TB HDD

Clinical Applications

Canine and feline thoracic, abdominal, and skeletal radiography
Pre-anaesthetic and post-operative routine imaging
Shelter and mobile-clinic radiography programmes
Small-mammal and exotic general radiography

Clinical Imaging Samples

Representative radiographs captured on the iSee-200 image chain across companion-animal and exotic species.

Feline pregnancy radiograph, lateral — Feline pregnancy — lateral

Feline pregnancy radiograph, VD — Feline pregnancy — VD

Snake whole-body radiograph — Ophidian — whole body

Workflow & Installation

Single-phase 110/220 VAC power. The compact footprint suits clinics with limited dedicated radiography space. Operating environment 5–35 °C, 10–75 % RH. Engineer-led installation and operator training included.

Package Contents

High-voltage generator + control box
X-ray tube assembly + high-voltage cables
17×17″ CsI flat-panel detector + adapter
LED collimator
Patient table (1200×600 mm)
iVetXray workstation: 23.8″ display, PC, software dongle
V-shape positioning set (1 large + 1 small)
Lead protection set: gown, hat, scarf, glasses, gloves
Foot switch, network cable

Downloads

iSee-200 product brochure (PDF)

Why Choose IWA-DR03

Workflow efficiency — same 1-second CsI acquisition as higher-tier IWA models.
Clinical accuracy — 16-bit A/D and 3.6 LP/mm resolution support diagnostic-quality general radiography.
Practice economics — lowest-cost entry into the IWA DR family without compromising image-chain components.

Warranty & Support

Two-year warranty on hardware and software. Optional extended-warranty service. Engineer-led on-site installation and operator training included.

FAQ

Q: How is iSee-200 different from iPet-400?
Same image chain (32 kW generator, 17×17″ CsI panel) but smaller 1200×600 mm table and single-display workstation. iPet-400 has a 1400×700 mm table and dual-monitor workstation.

Q: Is the tube focal spot the same as iPet-400?
No. iSee-200 uses 0.5 / 1.0 mm dual focus; iPet-400 uses 1.0 / 2.0 mm; iPet-400 Pro uses 0.6 / 1.2 mm.

Q: Does it support DICOM PACS integration?
Yes. The workstation is DICOM 3.0 compliant.

Q: What is the smallest room size required?
The compact 1200×600 mm table makes iSee-200 the easiest to install in tight clinic floor plans.

Basic Digital X-ray DR system iSee-200