Stainless-steel single-horse underwater treadmill — controlled water-resistance training, rehabilitation, and assessment in one unit.
Product Overview

IWA-TM10 is a single-horse stainless-steel underwater treadmill for veterinary rehabilitation and performance practice. The chamber combines transparent side windows, hydraulic front and rear sliding doors, and a non-slip belt — driven from a computer-controlled console at belt speeds from 0.8 to 14 km/h. Variable water depth changes the load gradient applied to each gait. Integrated ozone disinfection between sessions supports throughput at busy rehabilitation centres.
Key Features
- Computer-controlled belt — 0.8–14 km/h variable speed range.
- Stainless-steel chamber — corrosion-resistant for daily wet operation.
- Glazed viewing windows — full-length panels for therapist observation and gait analysis.
- Hydraulic sliding doors — front entry and rear exit; non-restrictive for handling.
- 2 HP recirculation pump — manages chamber fill, circulation, and drain.
- Ozone disinfection system — between-session water treatment.
- Integrated heater — water temperature management for cold-weather use.
- Footprint — 5 000 × 1 600 × 2 200 mm; 2 530 kg unit weight.
Visual Evidence




Single-horse chamber with computer-controlled belt and transparent panels — designed for both rehabilitation and conditioning programmes.




Technical Specifications
| Model | IWA-TM10 Equine Underwater Treadmill |
| Chamber dimensions | 5 000 × 1 600 × 2 200 mm (L × W × H) |
| Unit weight | 2 530 kg |
| Capacity | Single horse |
| Belt speed range | 0.8 – 14 km/h (computer-controlled) |
| Pump | 1 × 2 HP |
| Heater | Integrated |
| Disinfection | Ozonizer |
| Frame material | Stainless steel |
| Power supply | 220 V / 50 Hz |
| Door system | Hydraulic sliding doors (front + rear) |
| Observation | Transparent side windows full-length |
Clinical Applications
- Post-injury rehabilitation — tendon, ligament, joint, and surgical recovery.
- Conditioning of sport horses — controlled load gradient without track impact.
- Veterinary gait assessment under controlled water resistance.
- Reduced impact training for horses with back or leg issues.
- Muscle building and condition maintenance during stall-rest periods.
- Equestrian athletic centres requiring high-throughput rehabilitation.
Installation Notes
- Single-phase 220 V / 50 Hz supply required; confirm site capacity before installation.
- Bolted to a level, structurally-rated floor; concrete base or reinforced slab recommended.
- Fresh-water supply line and waste drainage required for fill / empty cycles.
- Recommended room clearances around the chamber for therapist circulation.
- Manufacturer commissioning required — schedule with supplier before site preparation.
Workflow
Fill chamber to the prescribed water depth for the patient’s training programme. Open the front hydraulic door, walk the horse onto the belt platform, and close the door. Start the belt at low speed via the computer console and ramp to the target speed; monitor through the transparent side windows. End the session by ramping down, opening the rear hydraulic door, and walking the horse out. Run the ozone disinfection cycle between patients.
Package Contents
- 1 × IWA-TM10 stainless-steel underwater treadmill chamber
- 1 × Computer control console
- 1 × 2 HP recirculation pump
- 1 × Integrated water heater
- 1 × Ozone disinfection module
- 1 × User manual and installation documentation
- Manufacturer commissioning included per supply agreement
Why Choose IWA-TM10
- Workflow efficiency — hydraulic doors and computer-controlled belt make sessions fast to start, monitor, and end.
- Clinical accuracy — variable water depth and belt speed deliver precise loading for rehabilitation and conditioning protocols.
- Practice economics — single unit covers rehabilitation, conditioning, and gait assessment in one room.
Warranty & Support
Manufacturer warranty per supply agreement. On-site installation, commissioning, and operator training included; service and replacement parts available through IWA Medical / LumaVet.
FAQ
- What is the minimum site preparation?
- A structurally rated, level floor; 220 V / 50 Hz electrical supply; fresh-water inlet and waste drainage. Detailed civil drawings available from the supplier.
- Can the chamber be installed indoors only?
- Indoor installation is standard; covered outdoor installation is feasible subject to environmental review.
- How long does a typical rehabilitation session last?
- 15–30 minutes is typical; specific protocols are veterinary-prescribed.
- Is the ozone disinfection sufficient between patients?
- Ozone treatment is part of standard between-session hygiene; full water exchange should follow the site’s rehabilitation protocol.
- What horses is the unit sized for?
- Standard adult sport horses; very large draft horses should be confirmed with supplier before specification.
























Reviews
There are no reviews yet.