Compact 10×12 inch wireless flat-panel detector — 100 µm pixel pitch, 4.3 LP/mm spatial resolution, 7.9 MP CsI a-Si sensor, IPX5 sealed housing, 8.5 h battery autonomy.
Product Overview
IWA-FP10 Mars 1012X is a high-resolution compact 10×12 inch wireless flat-panel detector manufactured by IRAY (Shanghai iRay Technology). The detector is built around an amorphous-silicon (a-Si) TFT array with a CsI scintillator and delivers a 2502 × 3152 pixel matrix at 100 µm pitch with 4.3 LP/mm spatial resolution.
This detector is suited for: Equine distal-limb and dental fine-detail imaging, ambulatory DR systems, small-mammal and exotic imaging where 4.3 LP/mm and IPX5 ingress protection matter.
Key Features
- 10×12 inch active imaging area (25 × 31 cm) with 2502 × 3152 pixel matrix at 100 µm pitch.
- 4.3 LP/mm spatial resolution with a-Si TFT photodiode + CsI scintillator for high DQE.
- 16-bit A/D conversion for full dynamic range.
- Trigger modes: AED (optional) / Software — compatible with any X-ray generator.
- Dual-band 2.4 / 5 GHz Wi-Fi data interface.
- 8.5 h battery autonomy on a full charge.
- IPX5 ingress protection for clinical disinfection and field-use robustness.
- Preview image: 1.5 s, cycle time: 3.5 s.
Product Gallery
Technical Specifications
| Brand | IRAY (Shanghai iRay Technology) |
| Model | Mars 1012X |
| Detector technology | Amorphous silicon (a-Si) TFT |
| Scintillator | CsI |
| Active imaging area | 25 × 31 cm (10×12 inch) |
| Pixel matrix | 2502 × 3152 |
| Pixel pitch | 100 µm |
| Spatial resolution | 4.3 LP/mm |
| A/D conversion | 16 bit |
| Trigger modes | AED (optional) / Software |
| Preview image time | 1.5 s |
| Cycle time | 3.5 s |
| Wireless / wired | Wireless (with internal battery) |
| Data interface | 2.4G & 5G, IEEE 802.11 a/b/g/n/ac |
| Battery autonomy | 8.5 h |
| Ingress protection | IPX5 |
| Dimensions | 269 × 362 × 15 mm |
| Weight | 2.3 kg |
| Operating temperature | 5 – 35 °C |
| Operating humidity | 10 – 90 % RH (non-condensing) |
Clinical Applications
- Veterinary general radiography (thoracic, abdominal, skeletal)
- Equine distal-limb and dental fine-detail imaging, ambulatory DR systems, small-mammal and exotic imaging where 4.3 LP/mm and IPX5 ingress protection matter.
- Replacing legacy CR cassettes in mixed-practice clinics
- Mobile / ambulatory DR workflow
Workflow & Installation
The detector connects to a host PC through dual-band Wi-Fi (2.4 / 5 GHz, 802.11 a/b/g/n/ac). IRAY supplies the iDetector / iRayDR acquisition software for first-run setup, calibration and routine maintenance. Calibration is recommended every 6 months or when X-ray generator / tube / collimator components are replaced. Cleaning: wipe with a non-abrasive surface disinfectant; do not immerse.
Package Contents
- 1 × IRAY Mars 1012X flat-panel detector
- 1 × Internal battery (~8.5 h autonomy)
- 1 × Battery charger / dock
- 1 × Power adapter
- 1 × iDetector / iRayDR acquisition software
- 1 × User manual
- 1 × Quality certificate
Downloads
Why Choose IWA-FP10
- Workflow efficiency — dual-band Wi-Fi and 8.5 h battery enable cordless DR workflow.
- Clinical accuracy — 4.3 LP/mm spatial resolution and 16-bit A/D with CsI scintillator deliver diagnostic-grade image quality.
- Manufacturer reliability — IRAY is a leading global X-ray detector OEM with extensive worldwide installation base.
Warranty & Support
Manufacturer warranty per supply agreement. Spare parts and authorised in-region service available through IWA Medical / LumaVet.
FAQ
Q: Is IWA-FP10 a static or dynamic detector?
Static. The Mars 1012X is designed for single-frame radiographic exposures (not fluoroscopy or dynamic imaging).
Q: What X-ray generators is it compatible with?
Any conventional X-ray generator. The detector supports AED (Auto Exposure Detection) for use without hard-wired sync, plus software-trigger workflow.
Q: How long does the battery last?
Approximately 8.5 hours per charge. The detector ships with a charger / dock for clinic use.
Q: Does it support DICOM?
The IRAY iDetector / iRayDR acquisition software outputs raw and processed images; DICOM 3.0 integration is typically provided by the host DR workstation software bundled with iVision / iVet / iPet workstations or by your existing PACS gateway.
Reviews
There are no reviews yet.