Compact 10×12 inch wireless flat-panel detector — 100 µm pixel pitch, 5.0 LP/mm spatial resolution, IP56 sealed housing, dual-band Wi-Fi, 5 h battery autonomy.
Product Overview
IWA-FP12 is a compact 10×12 inch wireless flat-panel detector — 100 µm pixel pitch, 5.0 lp/mm spatial resolution, ip56 sealed housing, dual-band wi-fi, 5 h battery autonomy. The detector is suited for equine distal-limb radiography (carpus, tarsus, fetlock, phalanges), equine and small-animal dental imaging.
Key Features
- 10×12 inch active imaging area (25 × 30 cm) with 2536 × 3056 pixel matrix at 100 µm pitch.
- 5.0 LP/mm spatial resolution — high-detail capture for distal limb, dental, and exotic imaging.
- 16-bit A/D conversion for full dynamic range.
- X-ray voltage range 40 – 150 kV.
- Trigger modes: AED / Prep / Software.
- Dual-band 2.4 / 5 GHz Wi-Fi (IEEE 802.11).
- 5 h battery autonomy with 6000 mAh / 44.4 Wh / 12.8 V Li-ion battery, 4 h recharge.
- IP56 ingress protection — robust against splashes and dust in clinical and field settings.
- Compact 336 × 284 × 15.5 mm housing, 2.5 kg.
Product Gallery
Visual Evidence
Technical Specifications
| Detector technology | Amorphous silicon (a-Si) TFT |
| Scintillator | CsI |
| Active imaging area | 10 × 12 inch (25 × 30 cm) |
| Pixel matrix | 2536 × 3056 |
| Pixel pitch | 100 µm |
| Spatial resolution | 5.0 LP/mm |
| A/D conversion | 16 bit |
| X-ray voltage range | 40 – 150 kV |
| Trigger modes | AED / Prep / Software |
| Image acquisition time | 2 s |
| Data interface | Dual-band 2.4 / 5 GHz Wi-Fi (IEEE 802.11) |
| Battery | 6000 mAh / 44.4 Wh / 12.8 V Li-ion |
| Battery autonomy | 5 h @ 15 s cycle |
| Battery recharge | 4 h |
| Ingress protection | IP56 |
| Dimensions | 336 × 284 × 15.5 mm |
| Weight | 2.5 kg |
| Operating temperature | 5 – 35 °C |
| Operating humidity | 30 – 80 % RH (non-condensing) |
| Storage temperature | -10 – 55 °C |
| Storage humidity | 5 – 75 % RH (non-condensing) |
Clinical Applications
- Equine distal-limb radiography (carpus, tarsus, fetlock, phalanges)
- Equine and small-animal dental imaging
- Exotic and small-mammal radiography where 5.0 LP/mm spatial resolution matters
- Mobile / ambulatory DR workflow in clinics with bedside imaging
Workflow & Installation
The detector pairs with the host PC over dual-band Wi-Fi (2.4 / 5 GHz). Acquisition software handles calibration, image preview, and DICOM export. Calibration is recommended every 6 months or after components are replaced. IP56 housing supports wipe-down with non-abrasive disinfectants; do not immerse.
Package Contents
- 1 × IWA-FP12 wireless flat-panel detector
- 1 × Internal Li-ion battery (~5 h autonomy)
- 1 × Battery charger / dock
- 1 × Power adapter
- 1 × Acquisition software
- 1 × User manual
- 1 × Quality certificate
Why Choose IWA-FP12
- Workflow efficiency — dual-band Wi-Fi and 5 h battery enable fully cordless ambulatory DR workflow.
- Clinical accuracy — 100 µm pitch and 5.0 LP/mm deliver fine-detail capture for distal-limb and dental imaging.
- Field robustness — IP56 sealed housing tolerates splashes, dust, and barn-side use.
Warranty & Support
Manufacturer warranty per supply agreement. Spare parts and authorised in-region service available through IWA Medical / LumaVet.
FAQ
Q: Is this a static or dynamic detector?
Static. The detector is designed for single-frame radiographic exposures (not fluoroscopy or dynamic imaging).
Q: What X-ray generators is it compatible with?
Any conventional X-ray generator. The detector supports AED (Auto Exposure Detection) for use without hard-wired sync, plus software-trigger workflow.
Q: How long does the battery last?
Approximately 5 hours per charge. The detector ships with a charger / dock for clinic use.
Q: Does it support DICOM?
The acquisition software outputs raw and processed images; DICOM 3.0 integration is typically provided by the host DR workstation software (e.g. iVision / iVet / iPet workstations) or by your existing PACS gateway.
Reviews
There are no reviews yet.