Wired GigE 17×17 inch flat-panel detector — 9.4 MP CsI a-Si sensor, 139 µm pixel pitch, 3.5 LP/mm spatial resolution, IP52 housing, gigabit Ethernet data interface.
Product Overview
IWA-FP14 is a wired gige 17×17 inch flat-panel detector — 9.4 mp csi a-si sensor, 139 µm pixel pitch, 3.5 lp/mm spatial resolution, ip52 housing, gigabit ethernet data interface. The detector is suited for veterinary general radiography (thoracic, abdominal, skeletal), fixed-position dr upgrade for iso 4090 tabletop and wall-stand systems.
Key Features
- 17×17 inch active imaging area (43 × 43 cm) with 3072 × 3072 pixel matrix at 139 µm pitch.
- 3.5 LP/mm spatial resolution with a-Si TFT photodiode + CsI scintillator.
- 16-bit A/D conversion for full dynamic range.
- X-ray voltage range 40 – 150 kV.
- Trigger modes: AED / Prep / Software.
- Gigabit Ethernet (GigE) data interface — sustained low-latency image transfer.
- IP52 ingress protection.
- 460 × 460 × 15.5 mm housing, 4.5 kg — fits ISO 4090 wall-stand and table cassette trays.
Product Gallery
Visual Evidence
Technical Specifications
| Detector technology | Amorphous silicon (a-Si) TFT |
| Scintillator | CsI |
| Active imaging area | 17 × 17 inch (43 × 43 cm) |
| Pixel matrix | 3072 × 3072 |
| Pixel pitch | 139 µm |
| Spatial resolution | 3.5 LP/mm |
| A/D conversion | 16 bit |
| X-ray voltage range | 40 – 150 kV |
| Trigger modes | AED / Prep / Software |
| Image acquisition time | 2 s |
| Data interface | Gigabit Ethernet (GigE) |
| Ingress protection | IP52 |
| Dimensions | 460 × 460 × 15.5 mm |
| Weight | 4.5 kg |
| Operating temperature | 5 – 35 °C |
| Operating humidity | 30 – 80 % RH (non-condensing) |
| Storage temperature | -10 – 55 °C |
| Storage humidity | 5 – 75 % RH (non-condensing) |
Clinical Applications
- Veterinary general radiography (thoracic, abdominal, skeletal)
- Fixed-position DR upgrade for ISO 4090 tabletop and wall-stand systems
- Replacing legacy CR cassettes in mixed-practice and equine clinics
- High-throughput referral hospitals where wired data integrity is preferred over wireless
Workflow & Installation
The detector connects via GigE to a host PC for sustained low-latency image transfer. Compatible with any conventional X-ray generator. Calibration is recommended every 6 months or when X-ray generator / tube / collimator components are replaced.
Package Contents
- 1 × IWA-FP14 wired GigE flat-panel detector
- 1 × GigE tether cable
- 1 × Power adapter (DC 24 V)
- 1 × Acquisition software
- 1 × User manual
- 1 × Quality certificate
Downloads
Why Choose IWA-FP14
- Workflow efficiency — wired GigE eliminates wireless reconnection during high-throughput clinic days.
- Clinical accuracy — 3.5 LP/mm resolution with 16-bit dynamic range yields diagnostic-grade DR images.
- Practice economics — ISO 4090 standard form factor enables drop-in retrofit of existing CR or analogue systems.
Warranty & Support
Manufacturer warranty per supply agreement. Spare parts and authorised in-region service available through IWA Medical / LumaVet.
FAQ
Q: Is this a static or dynamic detector?
Static. The detector is designed for single-frame radiographic exposures (not fluoroscopy or dynamic imaging).
Q: What X-ray generators is it compatible with?
Any conventional X-ray generator. The detector supports AED (Auto Exposure Detection) for use without hard-wired sync, plus software-trigger workflow.
Q: What is the data interface?
Gigabit Ethernet (GigE), providing stable low-latency image transfer.
Q: Does it support DICOM?
The acquisition software outputs raw and processed images; DICOM 3.0 integration is typically provided by the host DR workstation software (e.g. iVision / iVet / iPet workstations) or by your existing PACS gateway.
Reviews
There are no reviews yet.